Hitachi WJ200 Series Instruction Manual page 389

C−8
Func.
Code
AVR deceleration gain
a084
Energy-saving operation
A085
mode
Energy-saving mode tuning
A086
Acceleration time (2)
A092
Acceleration time (2),
A292
2 motor
nd
Deceleration time (2)
A093
Deceleration time (2),
A293
2 nd motor
Select method to switch to
A094
Acc2/Dec2 profile
Select method to switch to
A294
Acc2/Dec2 profile, 2
Acc1 to Acc2 frequency
A095
transition point
Acc1 to Acc2 frequency
A295
transition point, 2
Dec1 to Dec2 frequency
A096
transition point
Dec1 to Dec2 frequency
A296
transition point, 2
Acceleration curve selection
A097
Deceleration curve selection
A098
[OI] input active range start
A101
frequency
[OI] input active range end
A102
frequency
"A" Function
Name
Gain adjustment of the braking
performance, range is 50 to
200%
Two option codes:
00...Normal operation
01...Energy-saving operation
Range is 0.0 to 100 %.
Duration of 2
acceleration, range is:
0.01 to 3600 sec.
Duration of 2
deceleration, range is:
0.01 to 3600 sec.
Three options for switching
from 1st to 2nd accel/decel:
00 ...2CH input from terminal
01 ...Transition frequency
motor
nd
02 ...Forward and reverse
Output frequency at which
Accel1 switches to Accel2, range
is 0.0 to 400.0 Hz
motor
nd
Output frequency at which
Decel1 switches to Decel2,
range is 0.0 to 400.0 Hz
motor
nd
Set the characteristic curve of
Acc1 and Acc2, five options:
00...linear
01...S-curve
02...U-curve
03...Inverse U-curve
04...EL S-curve
Set the characteristic curve of
Dec1 and Dec2, options are
same as above (a097)
The output frequency
corresponding to the analog
input range starting point,
range is 0.0 to 400.0 Hz
The output frequency
corresponding to the current
input range ending point,
range is 0.0 to 400.0 Hz
Description
segment of
nd
segment of
nd
Run Defaults
Mode
Lnitial data Units
Edit
100. %
00 −
50.0 %
10.00 sec
10.00 sec
10.00 sec
10.00 sec
00 −
00 −
0.0 Hz
0.0 Hz
0.0 Hz
0.0 Hz
00 −
00 −
0.00 Hz
0.0 Hz