Hitachi WJ200 Series Instruction Manual page 30

Wj200 series single-phase input 200v class three-phase input 200v class three-phase input 400v class

Hide thumbs Also See for WJ200 Series:

Table of Contents

Signal Ratings

Detailed ratings are in "Control Logic Signal Specifications" in chapter 4.

Signal / Contact

Built-in power for inputs

Discrete logic inputs

Discrete logic outputs

Analog output

Analog input, current

Analog input, voltage

+10V analog reference

Alarm relay contacts

24VDC, 100mA maximum

27VDC maximum

50mA maximum ON state current, 27 VDC maximum OFF state voltage

10bit / 0 to 10VDC, 2mA

4 to 19.6 mA range, 20mA nominal

0 to 9.8 VDC range, 10VDC nominal, input impedance 10kΩ

10VDC nominal, 10mA maximum

250 VAC, 2.5A (R load) max., 0.2A (I load, P.F.=0.4) max.

100 VAC, 10mA min

30 VDC, 3.0A (R load) max., 0.7A (I load, P.F.=0.4) max.)

5 VDC, 100mA min.

Troubleshooting