Transfermgr Examples; The Importresources Utility; Using The Importresources Command - Extreme Networks Ridgeline Guide Manual

Book Title
NOTE
Make sure the software version you download is compatible with the switch. If you download an
incompatible version, the switch may not function properly.
For uploading, you can specify multiple devices in one command. For the download options
●
( ,
-download -incremental
want to download to multiple devices, you must execute multiple TransferMgr commands.

TransferMgr Examples

The following examples illustrate the usage of these commands.
To upload configuration information from device 10.20.30.40, enter the following command:
●
TransferMgr -user admin -upload -dip 10.20.30.40
This will place the device configuration information in the file
directory under the TFTP root directory (by default
\Program Files\Extreme Networks\Ridgeline 3.0\user.war\tftp\configs
To upload and archive configuration information from device 10.20.30.40 managed by the Ridgeline
●
server running on host
the following command:
TransferMgr -host snoopy -port 81 -user master -password king -upload -a -dip
10.20.30.40
Assuming the default location for the TFTP root directory, and assuming that this command was
executed on July 24, 2010 at 10:02 AM, this will place the device configuration information in the file
\Program Files\Extreme Networks\Ridgeline
3.0\user.war\tftp\configs\2010\07\24\10_20_30_40_1002.txt
To download version 6.1.8 b11 of the ExtremeWare to an i-series device, enter the following
●
command:
TransferMgr -user admin -software v618b11.xtr -dip 10.20.30.40

The ImportResources Utility

The ImportResources utility allows you to import user and host resource definitions, and groups
containing those resources, from a source external to the Ridgeline system. You can import from an
Windows Domain server, an NIS server, or an LDAP directory. You can also import host and user
resource definitions from a tab-delimited text file.

Using the ImportResources Command

The ImportResources utility is located in the Ridgeline
<Ridgeline_install_dir>/client/bin
Networks\Ridgeline 3.0\client\bin
/opt/ExtremeNetworks/Ridgeline3.0/client/bin
366
, and ) you can specify only one device per command. If you
-software
on port 81, with Ridgeline login "master" and password "king," enter
snoopy
. By default this is
in Windows, or
10_20_30_40.txt
.
directory,
bin
\Program Files\Extreme
in a UNIX environment.
Ridgeline Concepts and Solutions Guide
in the
configs
).