Managing Ethernet Services
Figure 53: Provisioning Window for an Ethernet Service
14 After Ridgeline successfully validates the selected options, it verifies network connectivity to the
target switches. If a connection can be established to all of the target switches, Ridgeline deploys the
configuration commands, then saves the configuration file on each switch. Finally, Ridgeline updates
its own database with information about the configuration changes on the switches.
The information in the Provisioning window is logged in the Ridgeline Audit Log. See
Logged Information about Provisioning Tasks" on page 84
Modifying an Ethernet Service
For existing E-Line and E-LAN services, you can edit settings and deploy the changes to the devices
where the service is configured.
To modify an Ethernet service, do the following:
1 Under Network Views, select the Services view.
2 In the Services table, select the Ethernet service you want to modify, right-click, and select the setting
you want to modify from the pop-up menu.
For an Ethernet service, you can edit the name and description of the service, the customer the
service is assigned to, bandwidth profile settings, and the UNI ports specified for the service.
94
for more information.
Ridgeline Concepts and Solutions Guide
"Viewing