Extreme Networks Ridgeline Guide Manual page 107

Figure 65: E-Line/E-LAN Wizard Dialog Box - Enter Name of New Service
5 Choose the Transport type you want to use in this service from the drop down list:
802.1Q (VLAN)
●
802.1ah (PB/VMAN)
●
802.1ad(PBB)
●
6 Click Next. If you select VLAN as the transport type, the dialog opens and asks: What is the VLAN
used in the service? See
drop down list in the Traffic mapping section of the dialog box
7 Choose the appropriate VLAN.
8 Choose the UNI ports for this service; select a device from the Available devices list and select ports
from the Available ports list. Then move them to the Selected list on the right. An E-Line service
must consist of 2 UNI ports. An E-LAN service can have 2 or more UNI ports.
NOTE
Only the ports present in the VLAN show in the Available ports list.
Ridgeline Concepts and Solutions Guide
Figure 66. A list of VLANs available in Ridgeline show in the 802.1Q(VLAN)
7
105