Running Vlan Configuration Scripts - Extreme Networks Ridgeline Guide Manual

Managing VLANs

Running VLAN Configuration Scripts

Ridgeline includes a number of bundled scripts that allow you to specify VLAN configuration settings
and deploy them on managed Extreme devices. Using Ridgeline scripts, you can perform the following
tasks:
Create and configure a new VLAN
●
Modify an existing VLAN
●
Configure protocol settings for a VLAN
●
Delete a VLAN and related configuration settings
●
Assign a VLAN to an EAPS domain
●
To run an Ridgeline script, go to the Services menu and select a script from the VLAN menu.
shows the parameter configuration screen for the Create VLAN script.
Figure 96: Configuration Screen for the Create VLAN Script
For information on how to use Ridgeline scripts, see
page 229.
NOTE
After a VLAN is created, it may take between 1 and 5 minutes for the new VLAN to appear in Ridgeline
displays.
138
"Creating and Running Ridgeline Scripts" on
Ridgeline Concepts and Solutions Guide
Figure 96