Extreme Networks Ridgeline Guide Manual page 99

Figure 58: Bandwidth Profile Configuration Window
2 Click New to create a new bandwidth profile, or select an existing profile and click Edit.
Figure 59: Bandwidth Profile Settings Window
3 In the Bandwidth Profile Settings window, enter a name for the bandwidth profile, and specify
settings for the following parameters:
Quality Profile (QP)
Single/Dual Rate
Committed Information Rate (CIR)
Committed Burst Size (CBS)
Excess Information Rate (EIR)
Excess Burst Size (EBS)
Ridgeline Concepts and Solutions Guide
The average rate for service traffic up to which the network delivers the
service traffic and is committed to meeting the performance objectives
defined by the CoS Service Attribute.
You can specify the CIR in Kbps, Mbps, or Gbps.
The maximum allowed size for a burst of service traffic sent at the UNI
speed to remain CIR-conformant.
You can specify the CBS in Kb, Mb, or Gb.
The average rate of service traffic up to which the network may deliver
service traffic but without any performance objectives.
You can specify the EIR in Kbps, Mbps, or Gbps.
The maximum size of a burst of service traffic sent at the UNI speed to
remain EIR-conformant.
You can specify the EBS in Kb, Mb, or Gb.
6
97