Copying Or Moving Groups - Extreme Networks Ridgeline Guide Manual

Organizing Devices and Ports Into Groups
Figure 26: Port Selection Window
5 The port selection window lists all of the ports on all of the devices you selected in the Add to port
group window. Select the ports you want to add to the port group. You can use the Filter and Quick
Filter boxes to limit the number of ports displayed in the table. Use Shift-Click to select a group of
ports or Ctrl-Click to select individual ports.
6 After selecting the ports, click the Add Selected Port(s) to Group button.
The Copy to group window is displayed. This window lists the port groups that have been created
in Ridgeline. By default, just the top-level groups are displayed. To display the subgroups within a
top-level group, click the plus sign next to the group name.
7 Select the group in which you want to place the port(s). Note that a port can be placed in a top-level
group hierarchy only once. See
8 Click OK to place the port(s) in the selected group.

Copying or Moving Groups

You can copy or move a device group into another device group, and copy or move a port group into
another port group. Note that device groups cannot be moved or copied into port groups, and port
groups cannot be moved or copied into device groups. Groups cannot be copied or moved to the root
(Network Views) group.
58
"Group Membership Guidelines" on page 53 for more information.
Ridgeline Concepts and Solutions Guide