Viewing Vlan Information - Extreme Networks Ridgeline Guide Manual

10

Viewing VLAN Information

To view information about VLANs in Ridgeline, click a device group or the All group under the
Network Views folder, then click the VLANs tab. A table listing the VLANs in the group is displayed.
If you also have enabled the map view of the device group, you can select a VLAN and display an
overlay view highlighting all of the devices and links in the map where the selected VLAN is
configured, as shown in Figure 97.
Figure 97: VLANs in a Map View
You can filter the contents of the table by expanding the Filter box, and entering text and search criteria,
or by expanding the Quick Filter box and selecting an available quick filter. The status of the VLAN is
indicated with an icon in the table.
You can enable the "Show Full Path" checkbox to display the path a packet would take across the
various VLANs in the network, taking into consideration VLAN services configured on the managed
devices, such as subscriber VLANs, Private VLANs, and VMANs.
Ridgeline Concepts and Solutions Guide
139