Rerunning A Script; About Extremexos Scripts - Extreme Networks Ridgeline Guide Manual

Creating and Running Ridgeline Scripts
Figure 196: Response Detail Window for a Script
The response detail window displays messages generated when the script was run. As a
troubleshooting aid, you can review the contents of the window for error messages.
To open a script, select it in the Audit Log Details window and then select Open script from the File
menu. The script is opened in an editor window. You can then make changes to the script, and rerun it.

Rerunning a Script

If the deployment result for a script was unsuccessful, you can open it from Ridgeline, make
corrections, and rerun it.
To rerun a script from the Audit Log, select Rerun from the Action menu, which starts the Run Script
wizard for the script.

About ExtremeXOS Scripts

ExtremeXOS scripts files contain CLI commands and scripting structures that can be executed on
Extreme Networks devices. Any ExtremeXOS CLI command can be used in an ExtremeXOS script.
ExtremeXOS scripts are supported on devices running ExtremeXOS 11.4 or later.
The Ridgeline Configuration Manager provides an interface for editing, managing, and deploying
ExtremeXOS scripts. Using Ridgeline, you can create an ExtremeXOS script, either from scratch or using
a pre-configured script template, then deploy the script to selected devices. You can also view
information about scripts that have been executed on Extreme devices. See the "Configuration
Manager" chapter in the Ridgeline Reference Guide for information about how to use the Ridgeline
Configuration Manager to configure and deploy ExtremeXOS scripts.
Ridgeline Concepts and Solutions Guide
248