Using The Ridgeline Debugging Tools; Reconfiguring The Freeradius Server - Extreme Networks Ridgeline Guide Manual

Tuning and Debugging Ridgeline
If changing ports with the Port Configuration Utility does not solve your port conflict problems, you
can change some of the other ports used by the Ridgeline server. To change these ports, you must edit
the file found in the
runserver.sp
In Windows, this would be
●
3.0\jboss\bin\runserver.sp
In Solaris, it would be
●
The ports defined in this file, and their default settings, are:
jboss.webservice.port=8083
jboss.ejb3.remoting.port=3873
jboss.naming.rmi.port=10554
jboss.naming.jnp.port=10555
jboss.invoker.jrmp.port=10556
epicenter.web.port=8080
editing the runserver.sp file)
When you edit this file, take care not to add any extra spaces. If editing this file does not solve your
problems, you should call your Extreme Networks Technical Support representative for help.

Using the Ridgeline Debugging Tools

The Ridgeline debugging tools are available through the Reports modules for users with an
administrator role. You should not attempt to use any of these tools except under the direction of
Extreme Technical Assistance Center personnel.
This "report" provides links to the following tools:
Set logging level: lets you set the Server Side Client Debug Level, and the Server Debug Level. This
●
page also shows you the debug Telnet port number.
Check server internals: This creates a report of server internal status.
●
Query Database: Lets you enter an SQL query against the Ridgeline database. This is for use only at
●
the direction of Extreme Technical Assistance Center personnel.

Reconfiguring the FreeRadius Server

The configFreeRadius is a command line tool to help configure the Ridgeline FreeRADIUS server. Use
FreeRADIUS for Ridgeline's VM-Mobility feature. If you do not use this feature, you do not need to
reconfigure this server.
Run this tool when the server IP address changes, or use it to set FreeRADIUS on a different port. Refer
to "FreeRadius Server Configuration Commands" on page
228
directory under the Ridgeline installation directory:
jboss/bin
\Program Files\Extreme Networks\Ridgeline
.
/opt/ExtremeNetworks/Ridgeline3.0/jboss/bin/runserver.sp
(This port should be changed using the Port configuraiton Utility, not by
368.
Ridgeline Concepts and Solutions Guide