Extreme Networks Ridgeline Guide Manual page 94

Managing Ethernet Services
Figure 51: Traffic Mapping Options for an Ethernet service (PBB BVLAN Transport Type)
8 In the Traffic Mapping box, select the VLAN, VMAN, or BVLAN that will be used as the transport
method for the service. Ridgeline automatically populates the list box with the available VLANs,
VMANs, or BVLANs.
For VLANs, specify whether traffic is tagged or untagged for both UNI ports, or for a selected
●
UNI port.
For BVLANs, specify the ISID and ISID name, and the name and tag of the VLAN (for port-based
●
services), SVLAN, or CVLAN.
9 Optionally specify a bandwidth profile to use one or more ports in the service. See
Bandwidth Profile" on page 96
method is a BVLAN, bandwidth profile selection is on the following screen.)
10 Indicate whether to enable the service after it has been provisioned on the target devices.
11 By default, Ridgeline validates the settings you selected for the Ethernet service, then gives you the
option to deploy the service on the target devices.
If you want to deploy the service immediately after successful validation, without a separate
deployment step, check the box next to "If validation has no errors, continue automatically to
creating the new service."
12 When you have finished configuring the Ethernet service, click the Validate button to start the
validation process. (If the transport method is a BVLAN, click Next to specify bandwidth profile
settings, then click Validate.)
92
for information on setting up bandwidth profiles. (If the transport
"Creating a
Ridgeline Concepts and Solutions Guide