Editing Monitored Device Ports - Extreme Networks Ridgeline Guide Manual

Figure 207: Enable Monitoring Wizard—Successful Results
13 To view the details of the script run, choose an item on the list. The details show in the field below.
If Ridgeline cannot enable monitoring on a device, the list indicates: Unsuccessful. Select the item
with an error. The script run details show in the field below.

Editing Monitored Device Ports

To edit ports that are being monitored on a device., do the following:
1 Go to Ridgeline Administration>ID management: Network users.
2 On the Network users devices tab, select a device.
3 Right click on the device. the menu opens.
4 Choose Edit Ports. Or, on the menu bar go to Edit>Ports>of network-users devices. The Edit Ports of
Network Users devices dialog box opens and instructs: "Add and remove ports on which to monitor
network-users information." The device you selected on the Network users table shows on the
Selected devices list. The available ports for the device are shown.
5 Add or remove ports for monitoring on the Selected ports list.
Ridgeline Concepts and Solutions Guide
17
259