Modifying A Vlan - Extreme Networks Ridgeline Guide Manual

Provisioning Network Resources
Figure 40: Progress and Results Window for VLAN Provisioning Tasks
8 Ridgeline validates the options you selected against a set of predefined configuration rules, and
ensures that the target switches are running a version of software that supports the features you are
provisioning.
If Ridgeline successfully validates the selected options, it verifies network connectivity to the target
switches. If a connection can be established to all of the target switches, Ridgeline deploys the
configuration commands, then saves the configuration file on each switch. Finally, Ridgeline updates
its own database with information about the configuration changes on the switches.

Modifying a VLAN

For existing VLANs, you can edit settings and deploy the changes to the devices where the VLAN is
configured.
To modify a VLAN, do the following:
1 Under Network Views, select the folder containing the devices you want to configure.
2 In the Navigation Table, click the VLAN tab, and select the VLAN you want to modify.
80
Validating command syntax and
checking software compatibility
Verifying connectivity to the
selected devices
Deploying the commands on
the devices
Updating the device information
in the database
The validation rules or commands
entered on the device for the
selected task
Ridgeline Concepts and Solutions Guide