Disabling Monitoring - Extreme Networks Ridgeline Guide Manual

Using Identity Management
Figure 208: Edit Ports of Network Users devices
6 Click Save changes to modify the ports being monitored. Or, click Edit Notification to change
additional port information such as:
Host IP address
●
XML target
●
Connection type
●
Virtual router (VR) name.
●
7 Click Save changes. Ridgeline validates the changes and returns the results of the modification as
successful or unsuccessful.
8 Click Close.

Disabling Monitoring

You can disable monitoring on selected edge switches. When you do this, all identity related
configurations are removed including roles, LDAP settings, attached roles-policies that exist.
Disabling monitoring on a switch does not remove the settings from the Ridgeline database; this allows
you to reapply them in the future, if needed.
To disable monitoring on a switch, do the following:
1 On the Network-users devices list, select the devices on which you want to disable monitoring.
2 On the menu bar, go to Edit>Disable monitoring of. Or, select the devices and right click to open the
menu. See Figure 209.
260
Ridgeline Concepts and Solutions Guide