Extreme Networks Ridgeline Guide Manual page 108

Importing Services
Figure 66: UNI Port Selection Dialog (Transport Type - VLAN)
9 Click Validate if you chose VLANs as the transport type; then go to step 14.
10 If you select PBB as the transport type, the dialog opens asking: What are the BVLANs, ISIDs, and
SVLANs/CVLANs used in the service? See
Ridgeline shows a list of Available BVLANs in the 802.1ah(PBB) drop down list in the Traffic
mapping section of the dialog box.
When you choose the BVLAN, Ridgeline lists all the ISIDs associated with the BVLAN.
When you choose ISID, all the CVLANs or SVLANs associated with the ISIDs show in the Available
VLANs list in the Traffic mapping section of the dialog box. See
11 Choose the CVLAN/SVLAN from the available VLANs list.
12 Choose the UNI ports for this service from the Available ports list. Then move them to the Selected
list on the right. An E-Line service must consist of 2 UNI ports. An E-LAN service can have 2 or UNI
ports.
For additional information, refer to
106
Figure 67.
"Creating an Ethernet Service" on page
Figure 68.
111.
Ridgeline Concepts and Solutions Guide