Modifying A Bvlan - Extreme Networks Ridgeline Guide Manual

Managing PBB Networks
Figure 75: Progress and Results Window for VMAN Provisioning Tasks
6 Ridgeline validates the options you selected against a set of predefined configuration rules, and
ensures that the target switches are running a version of software that supports the features you are
provisioning.
If Ridgeline successfully validates the selected options, it verifies network connectivity to the target
switches. If a connection can be established to all of the target switches, Ridgeline deploys the
configuration commands, then saves the configuration file on each switch. Finally, Ridgeline updates
its own database with information about the configuration changes on the switches.
The information in the Progress and Results window is logged in the Ridgeline Audit Log. See
"Viewing Logged Information about Provisioning Tasks" on page 84

Modifying a BVLAN

For existing BVLANs, you can edit settings and deploy the changes to the devices where the BVLAN is
configured.
To modify a BVLAN, do the following:
1 Under Network Views, select the folder containing the devices you want to configure.
2 In the Navigation Table, click the PBB tab, and select the BVLAN you want to modify.
116
Validating command syntax and
checking software compatibility
Verifying connectivity to the
selected devices
Deploying the commands on
the devices
The validation rules or commands
entered on the device for the
selected task
for more information.
Ridgeline Concepts and Solutions Guide