Filtering The Audit Log View; Displaying Audit Log Details For A Script - Extreme Networks Ridgeline Guide Manual

16
Within each tab are filters that allow you to limit the information in the display based on the time
period deployed, log table contents, or details table contents. The log table contains information about
each deployed profile or script. The details table contains information about the deployment results of a
selected profile or script on each device where it was run.

Filtering the Audit Log View

The log table can display the scripts that meet the filter criteria defined in the Time Period and Log
Items filter. For example, you can specify for the Time Period filter to display all scripts deployed over
the past 24 hours. When you do this, the filtered list of scripts appears in the log table.
You can further filter the log table by entering text in the Log Items filter. For example, if you enter
VLAN in the Log Items filter, the log table shows only rows that contain the text VLAN. Using the drop-
down search menu, you can specify additional filter criteria, including column name, case-sensitivity,
and wildcard matching.

Displaying Audit Log Details for a Script

To display details about an Ridgeline script, click on a row in the log table. Information about the script
appears in the details table. If you double-click on the row, the details are displayed in a separate
window, as shown in Figure 195.
Figure 195: Audit Log Details Window
The Audit Log Details window displays the name of the deployed script, user-defined comments, and
who created it.
You can display additional information about how the script was deployed on a specific device by
selecting Open from the File menu, or double-clicking a row in the table. When you do this, the
Response Detail window is displayed, as shown in Figure 196.
Ridgeline Concepts and Solutions Guide
247