Removing Devices Or Ports From Groups; Modifying The Properties Of A Group - Extreme Networks Ridgeline Guide Manual

To copy or move a group to another group, do the following:
1 In the Network Views folder, select the group you want to copy or move.
2 Right-click and select either Copy to group or Move to group from the pop-up menu.
A window is displayed listing the groups that have been created in Ridgeline. By default, just the
top-level groups are displayed. To display the subgroups within a top-level group, click the plus sign
next to the group name.
3 Highlight the destination group in which you want to copy or move the selected group, then click
the OK button.
The selected group is moved or copied to the destination group. If the copy or move operation
would result in a device or port being placed in a top-level group hierarchy more than once,
Ridgeline displays an error message, and the operation is cancelled.

Removing Devices or Ports from Groups

To remove a device or port from a group, do the following:
1 In the Network Views folder, select the group that contains the device or port you want to remove.
2 Select the device or port in the table.
3 From the Edit menu, select Delete.
Ridgeline prompts you for confirmation to delete the selected devices or ports. For a device, you can
elect to delete it from just the selected group or from all groups. If you delete a device from all
groups, it is removed from the Ridgeline inventory database.

Modifying the Properties of a Group

You can change the properties for a device group or port group, including the group name or
description.
To change the properties for a group, do the following:
1 In the Network Views folder, select the group whose properties you want to modify.
2 From the File menu, select Group > Properties to display the Properties window for the group, as
shown in Figure 27.
Ridgeline Concepts and Solutions Guide
3
59