Step 2. Associate Users With The Ridgeline Group - Extreme Networks Ridgeline Guide Manual

Book Title
1 To add a group, select the appropriate domain under Active Directory Users and Computers, then
click Users, then New> Group
Figure 270: Adding a Group
2 Type the same group name in each of the two group name fields. Scope should be Global, type
should be Security. Click OK.
3 If you want to authenticate Ridgeline users with more than one role, repeat these steps to create a
group that corresponds to each Ridgeline role you use. For example, if you want to authenticate
users with an Admin role and users with a Monitor role, you would create a group for each role
type—such as NMS-Admin and NMS-Monitor.

Step 2. Associate Users with the Ridgeline Group

If necessary, create one or more new users.
To add a new user, click Users, the New>User. Follow the steps to enter the user information and
●
password.
Associate each user with the appropriate Ridgeline-related group, based on the role you want that user
to have within Ridgeline.
332
Ridgeline Concepts and Solutions Guide