Active Users Tab - Extreme Networks Ridgeline Guide Manual

Using Identity Management

Active Users Tab

Figure 245 shows the Active Users tab of the Users table.
Figure 245: Users Table – Active Users Tab
The Active Users tab of the Users table has the following columns. You can filter the contents of the
table by expanding the Filter box, and entering text and search criteria, or by expanding the Quick Filter
box and selecting an available quick filter.
User name
Role
Log on time
Port number
User's MAC address
Device IP address
User's IP address
Authentication method
Status
Device name
288
The login name of the human user, or "None" if it is a device user, along with an
icon indicating the status of the user. The status icon can be one of the following:
or or The user is active.
or or The last known status of the user is active.
or or The user was unable to log into the network.
or or The user is inactive.
or or Ridgeline has stopped monitoring the switch where the user is
connected.
Role to which the user is attached. For XOS devices running 12.4 or earlier, the
Role shows Unknown.
Date and time the user logged on to the network. If the switch is running
ExtremeXOS 12.3 or earlier, no information is shown and the switch cannot be
added to the monitoring list.
The port number on the switch where the user connected to the network.
The MAC address of the user.
The IP address of the switch where the user connected to the network.
The IP address assigned to the user.
Date and time the user attempted to log in and encountered an authentication
failure. If authentication did not fail for the user, this is N/A.
Status of the user. This can be one of the following: active, inactive, last known:
active, failed log on, inactive user, or stopped monitoring.
The name and status of the switch where the user connected to the network. If the
switch is running ExtremeXOS 12.3 or earlier, this is shown as Unavailable.
Ridgeline Concepts and Solutions Guide