Running A Script - Extreme Networks Ridgeline Guide Manual

Creating and Running Ridgeline Scripts

Running a Script

To run a script, do one of the following:
Select a device, port, or group in a Network Views folder, and select Run script from the Device
●
menu, or right-click the item and select Run script. If the script has been configured to be shown in
the shortcut menu for the selected item, then the script is listed in the Run Script window, as shown
in Figure 183.
Figure 183: Run Script Window
Select the script in the Script view, then select Run from the Action menu. A window appears
●
prompting you for the Device or Device group where the script should be run. Follow the prompts
to select the devices.
After the devices have been selected, a window appears prompting you for the sequence in which to
execute the script on the devices. You can specify an order, or leave the default order.
238
Ridgeline Concepts and Solutions Guide