Enabling Role-Based Access Control On New Devices - Extreme Networks Ridgeline Guide Manual

Figure 209: Choosing Disable Monitoring
3 A dialog asks you to confirm your selection. See
Figure 210: Disable Monitoring Confirmation
4 Click Yes to disable monitoring. Click No to continue monitoring on the switch. A dialog box
confirms that monitoring is disabled on the devices you chose. See
Figure 211: Disable Monitoring—Results Dialog

Enabling Role-based Access Control on New Devices

To enable role-based access control on new devices, do the following:
1 On the Folder List go to Ridgeline Administration>Network users and click the Role-based access
control tab. Open File on the menu bar and choose Enable role-based access control. See
The Enable access control on new devices wizard launches and opens a dialog box that instructs you
to: Select the network -users devices on which you want to enable the role-based access-control
feature. SeeFigure 213.
It shows available devices on the network. It also lists all devices currently enabled with ID
monitoring; these are grayed out.
Ridgeline Concepts and Solutions Guide
Figure 210.
Figure 211.
Figure 212.
261
17