Adding And Importing Vms - Extreme Networks Ridgeline Guide Manual

Managing Virtual Machines
Figure 102: VM Manager Table
Adding and
Importing VMs
When you want to add a VM to your network, Ridgeline identifies a VMM and any associated VMs and
imports them. After you add a VM, Ridgeline automatically tracks its movement and configuration
information.
Before you use the Import Wizard you need the following information:
IP address of the VM Manager
●
Type of VM manager
●
User name
●
Password
●
In addition, depending on the switch vendor, you will need the following:
For VMWare: You need to specify the parameters for the VMM.
●
For Citrix: You need to specify the parameters for each resource pool or cluster.
●
To add/import VMs, do the following:
150
Ridgeline Concepts and Solutions Guide