Disabling Role-based Access Control
To disable role-based access control, do the following:
1 On the menu bar, go to Edit>Disable role-based access control. Or, right click on the device on the
Devices enabled for role-based access control list. A menu opens. See
Figure 216: Disable Role-based Access Control on Ports Menus
2 Choose Disable role-based access control. A confirmation dialog box opens which asks: Are you sure
you want to disable role-based access control on the selected devices.?
Figure 217: Disable Role-based Access Control on Ports Confirmation Dialog Box
3 Click Yes to disable this feature or No to leave the feature configured as it is. When you click Yes, all
the Role, LDAP, and Role-Policy associations are removed from the switches.
Creating Roles
Ridgeline provides the interface to configure role-based access control. You start by defining a network
user role which includes defining match criteria for users and groups of users that need to access
information on the network. You also set priorities for these roles.
Ridgeline Concepts and Solutions Guide
Figure
216.
265
17