Extreme Networks Ridgeline Guide Manual page 364

Book Title
Table 16: FindAddr command options (continued)
Option
-port <port>
-f <file specification>
-help
Search address options:
-all
-mac <mac_address>
-ip <IP address>
Search domain options:
-dg <device group>
-pg <port group>
-dip <IP address>
-port <port>
You can specify only one Ridgeline server (database) in a command. If you want to search devices
●
from the inventory databases of multiple Ridgeline servers, you must use a separate command for
each server.
You can specify multiple IP and MAC addresses as search items by repeating the
●
options.
- For MAC addresses, you can specify a wildcard for the last three values in the address (such as
10:11:12:*:*:*).
- Wildcards are not supported for IP addresses. To search for multiple IP addresses, you can use
the option, or include multiple
-all
- You can specify both an IP address and a MAC address as search addresses in one command.
362
Value
Ridgeline server port number.
Do not specify this after the -dip option or it will be taken as a search
domain specification.
Name of file to receive output. If you do not specify a path, the file is
placed in the current directory. If the file already exists, it is
overwritten.
Displays syntax for this command.
Display all addresses located in the search
domain.
Locate the specified MAC address. The
address must be specified as six two-digit
hexadecimal values separated by colons
(xx:xx:xx:xx:xx:xx). You can specify a wildcard
address by specifying asterisks instead of the
last three values (for example, 21:14:18:*:*:*).
This option may be repeated.
Locate the specified IP address.
This option may be repeated.
Defines the search domain to include the
specified device group.
Defines the search domain to include the
specified port group.
Defines the search domain to include the
device specified by the IP address.
Defines the search domain to include one or more ports on the
device specified by the -dip option. Multiple ports can be specified
separated by commas. Slot and port are specified as slot:port. For
example, 1:2,2:3
Important: If used, this option must immediately follow the -dip option
to which it applies.
options.
-ip
At least one of
these options is
required.
The -mac and -ip
options may be
combined.
At least one of
-dip, -dg, or -pg
must be provided.
These options
may be repeated
and combined.
or
-ip
Ridgeline Concepts and Solutions Guide
Default
80
Comman
d window
(stdout)
None
None
None
All ports
on the
device
-mac