Transfermgr Examples - Extreme Networks EPICenter Guide Manual

Table 11: TransferMgr command options (continued)
Option
Download ExtremeWare software image:
-software <filename | path
and filename>
-dip <IP address>
-primary
-secondary
• You can specify only one EPICenter server (database) in a command. If you want to upload or
download to or from devices managed by multiple EPICenter servers, you must use a separate
command for each server.
• Configuration and image files are all stored in subdirectories of the EPICenter TFTP root directory,
which is by default
root directory by using the Server function of the EPICenter Configuration Manager applet.
• Standard ExtremeWare software images as shipped by Extreme Networks are provided in the
directory
\Program Files\Extreme Networks\EPICenter 5.0\user\tftp\images
environment, or
NOTE
Make sure the software version you download is compatible with the switch. If you download an
incompatible version, the switch may not function properly.
• For uploading, you can specify multiple devices in one command. For the download options
(
-download
want to download to multiple devices, you must execute multiple TransferMgr commands.

TransferMgr Examples

The following examples illustrate the usage of these commands.
• To upload configuration information from device 10.20.30.40, enter the following command:
TransferMgr -user admin -upload -dip 10.20.30.40
This will place the device configuration information in the file
directory under the TFTP root directory (by default
\Program Files\Extreme Networks\EPICenter 5.0/user/tftp/configs
• To upload and archive configuration information from device 10.20.30.40 managed by the EPICenter
server running on host
the following command:
TransferMgr -host snoopy -port 81 -user master -password king -upload -a -dip
10.20.30.40
EPICenter Concepts and Solutions Guide
Value
Download a software image from the specified file to the device
specified with the -dip option. The specified file must be located
in the <tftp_root>\images directory. By default, <tftp_root> is
<EPICenter_install_dir>\user\tftp.
Important: Make sure the software version is compatible with
the switch to which you are downloading.
IP address of device to which the image should be
downloaded. This option is required. It may not be repeated.
Download to the primary image location.
Download to the secondary image location.
<EPICenter_install_dir>\user\tftp
<EPICenter_install_dir>\user\tftp\images
/opt/extreme/epc5_0/user/tftp/images
, , and
-incremental -software
on port 81, with EPICenter login "master" and password "king," enter
snoopy
. You can change the location of the TFTP
directory (by default
on a Solaris system).
) you can specify only one device per command. If you
10_20_30_40.txt
The TransferMgr Utility
Default
None
None
Current location
in the Windows operating
in the
configs
).
197