7
C H A P T E R
This chapter describes using Ridgeline service reconciliation to import the following services:
Import E-Line Services
●
Import E-LAN Services
●
Importing E-Line and E-L AN Services
NOTE
It is best not to perform provisioning related operations on Ridgeline when you are importing services.
To import an E-line or ELAN service, do the following:
1 On the menu bar, go to Services>Import>E-Line. The E-Line wizard opens and asks: What is the
name and transport type of your service? See
Or, select a VLAN, VMAN, or BVLAN on the list and right click on your choice. A menu opens.
Select Import>E-line. When the E-line Wizard Information Input Screen launches, the transport type
is shown according to your choice (for example, if you choose a VLAN it is VLAN) You cannot edit
the information.
The UNI port selection page has the VLAN information automatically populated in the combo-box
and cannot be edited.
NOTE
The procedure to import an E-Line or E-LAN service is the same.
Ridgeline Concepts and Solutions Guide
Importing Services
Figure
64.
103