Extreme Networks Ridgeline Guide Manual page 259

Figure 204: Enable Monitoring—Device Groups
Figure 205: Enable Monitoring—Port Selection
8 Choose the device whose ports you want monitored on the Selected devices list. See
Available ports list shows the available ports for the device. You must choose a minimum of 1 port
on each device.
9 Click Add> to move the Available ports to the Selected ports list.
10 If you have chosen Device groups, select a device in Selected devices then choose the ports you want
monitored After choosing the ports for the first device, choose ports for the additional devices on the
list by repeating steps 8 and 9.
Ridgeline Concepts and Solutions Guide
17
Figure 205. The
257