Book Title
Figure 265: Modifying the Path
Click OK.
16 Next, open a cygwin window (by double clicking the Cygwin icon
Figure 266: Configuring the SSH Server Through Cygwin
17 At the prompt, enter
When the script asks about privilege separation be used, answer
●
When the script asks about local user, answer
●
When the script asks about install sshd as a service, answer
●
When the script asks for CYGWIN=, answer
●
18 When the script has finished, while in the (black) cygwin window, start the sshd service by typing
.
net start sshd
Step 4: Configure Microsoft Firewall to Allow SSH
Connects
By default the Windows firewall will block incoming SSH (port 22) connections. This section provides
steps to permit port 22 through the Windows firewall on the Ridgeline server machine.
If there is an SSH server already running on your server, you may be able to skip this step.
328
.
ssh-host-config
). A black window appears.
yes
.
yes
yes
ntsec tty
Ridgeline Concepts and Solutions Guide
.