To use the wizard, do the following:
1 On the menu bar, open Edit and choose Edit List of VM Devices. The Edit List of Devices dialog box
opens. See
Figure
106.
Figure 106: Select Device or Device Group
2 Select Devices or Device groups. If you select Devices, a window opens and asks "Monitor VMs on
which devices?" See
Device groups a window opens showing ports, device names and IP addresses. See
following conditions show disabled devices when:
You deselect a previously selected device, VM Tracking is disabled.
●
The device is grayed out, it does not support VM Monitoring
●
The device has Identity Management enabled.
●
All the devices in the group belong to all the cases described, the group is disabled.
●
NOTE
Removing all ports on a switch disables tracking for the switch.
Ridgeline Concepts and Solutions Guide
Figure
107. It shows the switch names and their IP addresses. If you select
11
Figure
108. The
153