Extreme Networks Ridgeline Guide Manual page 247

Figure 192: Script Tasks Table
From the Script Tasks table, you can configure parameters for a script task as well as specify a schedule
for running it. To configure a script task, double-click it in the table, or highlight it and select Open
from the File menu. The Script Task Configuration window is displayed.
Figure 193: Script Task Configuration Window
On the Script tab, you can specify global or device-specific parameters for the script.
●
On the Device and order tab you can specify the sequence of devices on which the script is executed.
●
On the Run-time settings tab you can specify run-time comments, audit log settings, and a timeout
●
value for the script.
On the Schedule tab, you can configure the script to run at specified times, either on a one-time or
●
recurring basis. You can also specify how often the script is run.
To save the configuration for the script task, select Save from the File menu. To run the script task,
select Run from the Actions menu.
Ridgeline Concepts and Solutions Guide
16
245