Extreme Networks Ridgeline Guide Manual page 348

Book Title
10 In the next window, provide the following:
Enter 210 for the Vendor-assigned attribute number.
Select String from the Attribute format drop-down menu.
Type an Attribute value that matches one of the Ridgeline role names; either a predefines role name,
such as Administrator or Monitor, or a user-defined role name. If the Attribute value does not match
a role, the user will default to the Monitor role only.
Ridgeline roles can be found in the Ridgeline Administration under the Roles tab.
Click OK to continue.
11 The new attribute will appear in the Multivalued Attribute Information window as
Vendor code: 1916
example).
Click OK to continue.
12 In the Edit Dial-in Profile window, click OK again.
A warning will appear, as shown in
Figure 294: Warning after editing the Remote Access Policy profile
The VSA is now configured for this remote access policy.
346
with the value set to the role name you entered (Administrator in this
Figure 294. Click No.
Ridgeline Concepts and Solutions Guide