Creating A Bandwidth Profile - Extreme Networks Ridgeline Guide Manual

Managing Ethernet Services
Figure 56: Customer Profile Configuration Window
2 Click New to create a new customer profile, or select an existing profile and click Edit.
Figure 57: Customer Settings Window
3 In the Customer Settings window, enter a name for the customer, and optionally specify a
description, address, contact, and fax number. When you are done, click Add (for a new customer
profile) or Modify (for an existing customer profile).
4 After you create a customer profile, you can apply it to an Ethernet service. See
Ethernet Service" on page

Creating a Bandwidth Profile

A bandwidth profile compares traffic received on a UNI port with a series of thresholds, and specifies
how the traffic should be forwarded based on those thresholds. A bandwidth profile can specify per-
port thresholds for Committed Information Rate (CIR), Committed Burst Size (CBS), Excess Information
Rate (EIR), and Excess Burst Size (EBS), as well as single/dual-rate profile settings. You can apply
bandwidth profiles to all UNI ports in an Ethernet service, or to selected UNI ports.
To create a bandwidth profile, do the following:
1 Open the Bandwidth Profile configuration window. You can do this when creating the service by
selecting New profile from the Bandwidth profile list in the Traffic mapping options window.
You can also right-click an existing service in a Network Views table, and select Edit bandwidth
profile from the pop-up menu, or open the Properties page for a service and click the Edit customer
button, then select New profile from the Bandwidth profile list, or select Bandwidth Profile from
the Tools menu.
96
94.
"Modifying an
Ridgeline Concepts and Solutions Guide