The Mib Poller Detail Report - Extreme Networks Ridgeline Guide Manual

The top area of the MIB Collection Detail Report shows the properties of the collection, as defined in the
file:
collections.xml
Collection Name
Polling Interval
Save Polled Data
Scope
Status
Startup State
Poll Saving Limit
Poll Limit
The two tables below show the scalar and tabular MIB variables (OIDs) for which polling will be done.
Each variable is identified by its OID and the data label that was provided in the xml file.

The MIB Poller Detail Report

The Poller Detail report simply shows the status of the collection for each device in the collection scope.
Figure 170: MIB Collection Detail Report
This report shows the following information:
Device
Status
Message
The last column provides checkboxes that can be used to select devices for which to export the
collection results.
To export results for a device, click to check the appropriate box, then click the Export button below the
table. You can select all devices by checking the box in the table header.
Ridgeline Concepts and Solutions Guide
The name of the collection
The polling interval, in seconds
Whether the polled data is being saved in the database (Yes or No)
The devices on which polling for this data is being conducted
The status of the collection (running or stopped)
Whether the poll should be started automatically when it is loaded (running) or should be
left in the stopped state
The lower boundary of the number of poll results that will be saved in the database. This
value is calculated by taking the maximum number of saved polls multiplied by the delete
percentage. The actual number of poll data sets in the database at any given time will be
somewhere between this value and the maximum poll saving limit.
A limit on the number of polls that should be performed. Currently this is always None, the
number of polling cycles cannot be limited at this time.
The name of the device. This is also functions as a link to the Device Details report for the
device
The status of the collection on this device (running, stopped, or error)
A message, if appropriate, explaining the status (such as an error message).
15
225