Hdlm Resident Processes; Reconfiguring The Hdlm Operating Environment - Hitachi XP P9500 User Manual

= view, completion time = yyyy/mm/dd hh:mm:ss
#
When the HDLM Manager column shows Dead, the HDLM manager is
inactive.
Use a script for confirmation:
Execute the following command to confirm that the HDLM manager is
inactive:
# /etc/init.d/DLMManager status
dlmmgr is stopped.
Note
If an error occurs, the execution results of the dlnkmgr command's view
operation might be different from those of the DLMManager status
command. In this case, see the execution results of the dlnkmgr
command.

HDLM Resident Processes

Table 4-2 HDLM resident processes on page 4-21
resident processes in HDLM. To monitor these processes, use the names
below.
Process
.dlmmgr_exe
hbsa_service
#
You only need to monitor this process when HDLM is linked to Global Link
Manager.

Reconfiguring the HDLM Operating Environment

This section describes tasks required for reconfiguring the HDLM operating
environment.
The tasks described in this section are required when you perform any of the
following operations:
• Replace hardware devices that make up a path
• Add new LUs
• Remove existing LUs
• Add paths to or remove paths from an LU
Table 4-2 HDLM resident processes
HDLM manager process
Hitachi Command Suite Common Agent Component
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Linux(R))
lists and describes the
Description
#
process
4-21