Setting In The Syslogd Settings File - Hitachi XP P9500 User Manual

Figure 3-5 Result of Executing vgdisplay -v (When There Are Two Physical
Check the shaded portion and confirm that vg02 consists of /dev/sde and /
dev/sdu, both of which have been defined for the same device to be
managed by HDLM.

Setting in the syslogd Settings File

The log upon executing the installation is output to syslog. In Red Hat
Enterprise Linux, check the syslogd settings file (system log configuration
definition file) and make sure that it specifies that messages with an Error
level or higher are to be output.
Figure 3-6 Example of the Contents of the syslogd Settings File (In Red Hat
Enterprise Linux) on page 3-79
syslogd settings file.
3-78
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Volumes)
shows an example of the contents of the