Gemac Core Without Management Interface And Without Address Filter; Optional Address Filter - Xilinx LogiCORE IP MAC v8.5 User Manual

Core Interfaces

GEMAC Core Without Management Interface and Without Address Filter

Figure 2-4
is omitted and the optional Address Filter is omitted.
The configuration_vector[67:0] input provides the method for configuration of
the core.
gtx_clk domain
gmii_rx_clk domain
Figure 2-4: Component Pinout for MAC without Optional Management Interface or Optional Address Filter
1-Gigabit Ethernet MAC v8.5 User Guide
UG144 April 24, 2009
-- DISCONTINUED PRODUCT --
shows the pinout for the GEMAC core when the optional Management Interface
Client Side Interface
gtx_clk
tx_data[7:0]
tx_data_valid
tx_ifg_delay[7:0]
tx_ack
tx_underrun
tx_statistics_vector[31:0]
tx_statistics_valid
pause_req
pause_val[15:0]
rx_data[7:0]
rx_data_valid
rx_good_frame
rx_bad_frame
rx_statistics_vector[27:0]
rx_statistics_valid
configuration_vector[67:0]
reset
www.xilinx.com
Physical Side Interface (GMII)
gmii_txd[7:0]
gmii_tx_en
gmii_tx_er
gmii_rx_clk
gmii_rxd[7:0]
gmii_rx_dv
gmii_rx_er
R
25