Supply Status Menu; Replacement Part Information Menu - Epson SC-R5000 Series User Manual

SC-R5000 Series/SC-R5000L Series User's Guide
Item
Cleaning(Light)
Cleaning(Medium)
Cleaning(Heavy)
Cleaning the Mainte-
nance Parts
Replace Waste Ink Bottle
Replace Wiper Unit
Keeping Preparation

Supply Status menu

Displays the amount of wear and the model number for each consumable item.
If you are using the SC-R5000L Series, select Ink to perform the following checks and settings.
❏ Check which ink supply unit is currently operating or supplying ink
❏ Check the status of non-operational ink supply units
❏ Manually switch the operational ink supply unit

Replacement Part Information menu

Displays the replacement timing for the selected replacement part.
Contact your dealer or Epson Support for assistance.
Control Panel Menu
Parameter Explanation
All Nozzles
You can set cleaning from three levels. Perform Cleaning (Light) first. If
clogging is not cleared by performing Cleaning (Light), perform
All Nozzles, Select
Cleaning (Medium), and then Cleaning (Heavy) if necessary.
Nozzles
When you select Cleaning (Medium) or Cleaning (Heavy), note the
numbers of patterns in the Standard pattern that contain faint or
missing dots, and then select and clean all the rows of nozzles or the
rows of nozzles including those numbers.
U
Anti-drying caps Start cleaning the selected parts. See the following for detailed
information on cleaning the parts.
Around the Head
U
Suction Cap
U
U
Flushing pad
U
Media cleaner
U
If you are replacing the waste ink bottle before the message indicating
that it is time to replace the waste ink bottle appears on the control
panel's screen, do so from this menu.
Starts the wiper unit replacement procedure. See the following for
detailed information on replacing the parts.
U
Always run this procedure if the printer will not be used for two weeks
or more (and will be turned off at this time.)
See the following for more information.
U
"Print Head Cleaning" on page 96
"Cleaning the anti-drying caps" on page 80
"Cleaning Around the Print Head" on page 79
"Cleaning the Suction Cap" on page 83
"Cleaning Around the Flushing Pad" on page 84
"Cleaning the Media Cleaner" on page 85
"Replacing the Wiper Unit" on page 91
"Long-term Storage (Pre-storage Maintenance)" on page 97
119