H. Main
Drive
(drum/developing)
1. Construction
2. Removing
1) Open the front door, and slide out
the process unit, fixing/feeding unit,
and holding tray assembly about 10
cm from the copier.
2) Remove the rear cover.
3) Remove the high-voltage PCB and
the
high-voltage
assembly.
4) Remove the waste toner bottle.
5) Remove the cleaner fan, feeding
fan, and developing fan.
6) Remove the fixing/waste toner drive
assembly.
7) Remove the three mounting screws
, and free the harness guide 1
COPYRIGHT © 1997 CANON INC.
Assembly
transformer
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
Figure 7-446
Figure 7-447
7-35