Main Motor/Main Drive Assembly; Detaching The Main Motor Unit; Detaching The Main Drive Assembly - Canon NP6218 Service Manual

D. Main Motor/Main Drive Assembly

1. Detaching the Main Motor Unit

1) Detach the rear cover.
2) Disconnect the two connectors
main motor unit

2. Detaching the Main Drive Assembly

1) Open the front door.
2) Pull out the drum cartridge.
3) Detach the multifeeder unit.
4) Detach the rear cover.
5) Detach the main motor.
6) Remove the clip ring
registration clutch
COPYRIGHT © 1997 CANON INC.
, and remove the three screws
.
Figure 7-212
, and disconnect the connector
.
Figure 7-213
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
; then, detach the
; then, detach the
7-11