Basic Construction; Overview; Electrical Control Unit - Canon Saddle Finisher-AF2 Service Manual

3.1 Basic Construction

3.1.1 Overview

The machine consists of the following 5 blocks: electrical control block, stacking block, transport block, intermediary tray, and saddle stitcher block (Note).
To host machine
The descriptions on the saddle stitcher block apply to the Saddle Finisher AF2.

3.2 Electrical Control Unit

3.2.1 Overview

The electrical control block governs all the control mechanisms of the machine, i.e., stacking block, transport block, intermediary tray block, and saddle stitcher
block.
The electrical control block consists of 2 entities: finisher controller PCB and saddle stitcher controller PCB (Note).
To host machine
The descriptions on the saddle stitcher controller PCB apply to the Saddle Finisher-AF2.
Electrical control block
Electrical
control block
controller PCB
Saddle stitcher
controller PCB
Stacking block
Intermediary
tray block
Saddle stitcher block
F-3-1
Finisher
F-3-2
Chapter 3
Transport
block
Stacking block
Transport block
Intermediary
tray block
Saddle stitcher
block
0020-3988
0020-4674
3-1