Loading Paper; Changing Paper Settings; Loading Paper In Trays 1 And 2 - Xerox VersaLink C405/N User Manual

Paper and Media

Loading Paper

This section includes:
•

Changing Paper Settings ............................................................................................................................................. 144

•

Loading Paper in Trays 1 and 2 ................................................................................................................................ 144

• Loading Paper in the Bypass Tray ........................................................................................................................... 147
• Configuring Trays 1 or 2 for the Paper Length ................................................................................................... 150
Changing Paper Settings
When you load paper into a tray, you can change the tray settings. The following options are available:
− Fully Adjustable: If you select this paper setting, you can change the paper size, type, and
color when you load paper into the tray.
− Dedicated: If you select this paper setting, you cannot change the paper size, type, and color
when you load paper into the tray.
− Bypass: When paper is present in this tray, it is used for print jobs where you did not specify
a particular tray.
For details on how to change the paper setting when loading paper in trays 1 and 2, refer to
Paper in Trays 1 and 2.
in the bypass tray, refer to
Loading Paper in Trays 1 and 2
You can adjust the length of the paper tray to accommodate A4, Letter (8.5 x 11 in.), and Legal
(8.5 x 14 in.) paper sizes.
To load paper in Trays 1 and 2:
1. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
144 Xerox VersaLink
®
User Guide
on page 144 For details on how to change the paper setting when loading paper
Loading Paper in the Bypass Tray
C405 Color Multifunction Printer
®
on page 147.
Loading