Embedded Fax Settings - Xerox ColorQube 9301 Administration And Accounting

Service Settings
Auto Image Rotation
The Auto Image Rotation feature
optimizes image output based on the job
settings selected. Disabling Auto Rotation
may result in image loss.
• Use the When Auto R/E Selected
options to instruct the system how to
proceed if the Auto Reduce/Enlarge
feature is selected. Select Auto
Rotate as needed to allow automatic
rotation, or Disable Rotation to
restrict the device from rotating the
image.
• Use the When Auto Paper Selected options to instruct the system how to proceed if Auto Paper is
selected. Select Auto Rotate as needed to allow automatic rotation, or Disable Rotation to
restrict the device from rotating the image.

Embedded Fax Settings

Select the Embedded Fax Settings option
to access the following settings:
• Fax Setup on page 288
• Feature Defaults on page 285
• Fax Country Setting
• Line 1 Setup on page 289
• Line 2 Setup on page 290
• Incoming Fax Defaults
• Transmission Defaults
• Mailbox & Polling Policies
page 293
• Mailbox Setup on page 293
• Setup Fax Reports
• Print Fax Reports on page 294
Fax Setup
Use this setting to Enable or Disable Embedded Fax.
• Enable activates the Embedded Fax service and is selectable from the Services Home screen.
• Disable switches off the service and it is not available for selection.
288 ColorQube™ 9301/9302/9303
Administration and Accounting
on page 289
on page 290
on page 291
on
on page 294