Administering And Monitoring The Vmps - Cisco Catalyst 4500 Series Configuration Manual

VLAN Membership Policy Server

Administering and Monitoring the VMPS

You can display the following information about the VMPS with the show vmps command:
VQP Version
Reconfirm Interval
Server Retry Count
VMPS Domain Server The IP address of the configured VLAN membership policy
VMPS Action
The following example shows how to display VMPS information:
Switch# show vmps
VQP Client Status:
--------------------
VMPS VQP Version:
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server:
Reconfirmation status
---------------------
VMPS Action:
The following example shows how to display VMPS statistics:
Switch# show vmps statistics
VMPS Client Statistics
----------------------
VQP
VQP
VMPS Changes:
VQP
VQP
VQP
VQP
VQP
Refer to the Cisco IOS Command Reference for details on VMPS statistics.
Note
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
15-28
The version of VQP used to communicate with the VMPS. The
switch queries the VMPS using VQP Version 1.
The number of minutes the switch waits before reconfirming the
VLAN-to-MAC-address assignments.
The number of times VQP resends a query to the VMPS. If no
response is received after this many tries, the switch starts to
query the secondary VMPS.
servers. The switch currently sends queries to the one marked
"current." The one marked "primary" is the primary server.
The result of the most-recent reconfirmation attempt. This action
can occur automatically when the reconfirmation interval
expired, or you can force it by entering the vmps reconfirm
command or its CVSM or SNMP equivalent.
1
other
Queries:
Responses:
Shutdowns:
Denied:
Wrong Domain:
Wrong Version:
Insufficient Resource: 0
0
0
0
0
0
0
0
Chapter 15 Configuring VLANs, VTP, and VMPS
OL-25340-01