Various Ways; Configuring; The Operator; Panel - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 2 How to Load Documents
5
Move the other hopper side guide to the target position
while pressing the side guide clutch.
In this case, slide the left hopper side guide as you press the side
guide clutch and leave no space between the hopper side guide and
the document.
Hopper Side Guide
6
Adjust the stacker extension to the document length, and
pull up the paper stop.
For information on how to set the stacker, refer to
Setting" (page 24).
7
Start up an application for scanning and scan the
documents.
For information on how to scan using ScandAll PRO, refer to "How to
Use ScandAll PRO".
"1.8 Stacker
To unlock the hopper side guide, follow the steps below.
1 Slide down the side guide lock of the hopper side
guide that is locked.
2 Move both hopper side guides towards the center
while pressing the side guide clutches.
3 Release the side guide clutches.
Both hopper side guides will now move in
conjunction with each other.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Side Guide

Configuring

Lock the Scan
Settings
How to Use

the Operator

unlocked

Panel

Various Ways

to Scan

Daily Care

Replacing

Consumables

Side Guide
Troubleshooting
Clutch
Operational
Settings
Appendix
Glossary
39