Konica Minolta Fujitsu fi-6800 Operating Manual page 181

Chapter 9 Operational Settings
Item Description
Maintenance and Specify the cycle for scanner
Inspection Cycle maintenance and inspection to be
performed by a service engineer.
When the specified time period
elapses since the last periodical
maintenance and inspection, a
message for periodical maintenance
appears.
Multi dropout Specify a color to be dropped out
colors from the scanned image (black &
white/grayscale mode only). You
can select any color(s) to drop out in
[Multi dropout colors].
Note that priority is given to the
scanner driver setting if any dropout
color has been specified in the
scanner driver's setup dialog box.
Overscan Control Outputs the image in the optimum
position when the image is partially
missing due to a large skew.
Setting/Value
Disable / Enable
Maintenance/Inspection cycle: 1 to 12
months
Use driver settings / Custom
Normal / Optimize
Black frame thickness: Thin (Default) to
Thick (level 1 to 3)
Factory Default SCSI or USB
Connector 1
: Configurable
-: Not configurable
Disable
Use driver -
settings
Normal
TOP
Contents
SCSI or USB
Index
Connector 2
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
-
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
181