Situation In Which The Document Is Not Fed Into The Adf Occur Frequently - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 8 Troubleshooting
Situation in which the document is not fed into
the ADF occur frequently.
Does the condition of the documents fulfill the
requirements described in "Precautions" in
(page 40)?
Yes
Did you fan the documents before loading them on the
hopper?
Yes
Are the consumables (*1) installed correctly?
Yes
Are any of the consumables (*1) dirty?
No
Are any of the consumables (*1) worn out?
No
*1: "Consumables" refers to the pick roller, separator roller and brake roller.
Use a document that satisfies the required conditions.
"Paper Quality" For more details, refer to
No
Fan the documents before loading, or reduce the amount of sheets.
No
Install the consumables (*1) correctly.
For information on how to install the consumables, refer to
No
Consumables" (page
Clean the consumables (*1).
For more details, refer to
Yes
or "6.3 Cleaning the ADF (with cloth)" (page 123)
Check the Consumables Counter. Replace the consumables if necessary.
For information on how to replace the consumables, refer to
Yes
Consumables" (page
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 166)
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
"2.2 Documents for Scanning" (page
130).
"6.2 Cleaning the ADF (with Cleaning Sheet)" (page 121)
130).
TOP
Contents
Index
Introduction
40).
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
"Chapter 7 Replacing
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
"Chapter 7 Replacing
Replacing
"8.4 Consumables
first, then contact
Troubleshooting
Operational
Settings
Appendix
Glossary
161