Back - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 1 Scanner Overview

Back

Ventilation Port
An outlet for ventilating hot air from inside the scanner.
Power Connector
A connector for the power cable.
Main Power Switch
Powers ON/OFF the scanner.
SCSI ID Switch
Used to configure the SCSI ID (Factory default setting: 5).
SCSI Connector 1
For connecting a SCSI cable.
USB Connector 1
For connecting a USB cable.
USB Connector 2
For connecting a USB cable.
A USB connector for using Kofax VRS.
SCSI Connector 2
For connecting a SCSI cable.
A SCSI connector for using Kofax VRS.
CGA Board
A CGA board for Kofax VRS.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
15