Konica Minolta Fujitsu fi-6800 Operating Manual page 176

Chapter 9 Operational Settings
Item Description
Intelligent Multifeed When there is paper of the same
Function size attached to a designated
location on the page, configure the
scanner to memorize the location of
the attachment and not detect
multifeeds for that location.
Note that you first need to select
[Check Overlapping (Ultrasonic)] for
multifeed detection setting in
"Specifying a multifeed detection
method [Multifeed]" (page 207)
the scanner driver's setup dialog
box. It can also be configured from
the operator panel.
Select to clear the overlap pattern
(length, location) memorized in Auto
mode.
Specify whether to enable or disable
the [Scan] button when using Kofax
VRS.
Specify whether or not to memorize
the multifeed pattern in the window
that shows the multifeed image.
Specify whether or not to memorize
the multifeed pattern at power-off.
Number of paper Configure this setting to change the
feeding retries number of feeding retries upon pick
errors.
It can also be configured from the
operator panel.
Setting/Value
Manual mode / Auto mode 1 /
Auto mode 2
or
[Clear overlap pattern] check box
Enable Scan button (VRS)
[Auto-Memorize MF Pattern (only when
MF images are displayed)] check box
Remember / Do not remember
1 to 12 times
Factory Default SCSI or USB
Connector 1
: Configurable
-: Not configurable
Manual mode
Not selected
Disable
Not selected
Do not remember
3 times
TOP
Contents
SCSI or USB
Index
Connector 2
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
176